Show Atm Pvc - Cisco 10000 Series Configuration Manual

show atm pvc

show atm pvc
To display all ATM permanent virtual connections (PVCs) and traffic information, use the show atm pvc
command in privileged EXEC mode.
Syntax Description vpi/vci
interface atm interface-number (Optional) Displays all PVCs on the specified ATM interface.
.subinterface-number
vpi/vci
vaccess detail
Command Modes Privileged EXEC
Command History Release
12.2(31)ZV1
Usage Guidelines
If you do not specify the vpi/vci or name argument, the output of this command is the same as that of the
show atm vc command, but only the configured PVCs appear.
If you specify the vpi/vci or name argument, the output of this command is the same as that of the show
atm vc vcd command, with extra information related to PVC management, including connection name,
detailed states, and Operation, Administration, and Maintenance (OAM) counters.
If you include the interface atm interface-number argument in the command, the output of this
command displays all of the PVCs under that interface or subinterface. If you include the vpi/vci vaccess
argument, the command output displays the names of all of the virtual access interfaces associated with
the PVC on the ATM interface. If you include the vpi/vci vaccess detail argument, the command output
displays detailed virtual access interface information.
The functionality and output of the show atm pvc {interface atm interface-number vpi/vci} command
is unchanged.
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
A-22
show atm pvc {interface atm interface-number [.subinterface] vpi/vci vaccess [detail]}
Modification
This command was introduced to display information about all of the virtual
access interfaces associated with an ATM PVC.
(Optional) ATM virtual path identifier (VPI) and virtual channel
identifier (VCI) numbers. The absence of the slash character (/) and
a vpi value causes the vpi value to default to 0.
To determine the appropriate form of the interface-number
argument, consult your ATM network module, port adapter, or
router documentation.
(Optional) Subinterface number in the range from 1 to
4294967293. The dot (.) is required as a separator between
interface-number and subinterface-number.
(Optional) Displays the names of all of the virtual access interfaces
associated with the PVC vpi/vci on the ATM subinterface you
specify.
Displays information about the virtual access interfaces associated
with the PVC vpi/vci on the ATM subinterface you specify.
Chapter A ANCP Command Reference
OL-14660-03