Verification Example For Atm Overhead Accounting - Cisco 10000 Series Configuration Manual

Chapter 7 Traffic Accounting

Verification Example for ATM Overhead Accounting

The following sample output from the show policy-map command indicates that ATM overhead
accounting is enabled for the class-default class. The BRAS-DSLAM encapsulation is dot1q and the
subscriber line encapsulation is snap-rbe based on the AAL3 service.
Policy Map unit-test
OL-14660-03
Class class-default
Average Rate Traffic Shaping
cir 10% account dot1q aal3 snap-rbe
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Verifying Traffic Accounting
7-19