Cisco 10000 Series Configuration Manual page 70

Parameterized Actions
Table 5-2 Parameterized Actions for a Service Policy (continued)
MQC QoS Action
ip unnumbered type number
ip vrf forwarding vrf-name
pppoe service service-name
redirect access-list {number |
name} [to groupname]
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
5-8
RADIUS Attribute
ip unnumbered if_name
ip vrf forwarding vrf
pppoe service pppoe_svc
l4list val to l4grp val
l4list val to l4addr val, l4port val,
l4dur val, l4freq val
Chapter 5 Dynamic Service Policy Modifications
Description
Enables IP processing on an interface without
assigning an explicit IP address to the interface.
type is the interface on which the router has assigned
an IP address. The interface cannot be an unnumbered
interface.
number is the interface or subinterface number.
if_name is the type and number of the IP unnumbered
interface.
Associates a virtual routing and forwarding instance
(VRF) with an Intelligent Service Architecture (ISA)
service policy-map.
vrf-name or vrf associates the service with the
specified VRF.
Adds a PPP over Ethernet (PPPoE) service name to a
local subscriber profile.
service-name or pppoe_svc is the name of the PPPoE
service to be added to the subscriber profile.
Associates an access control list with an Intelligent
Service Gateway (ISG) TCP redirect server group.
number specifies the access control list number.
name specifies the access control list name.
l4list val specifies the access control list number or
name.
(Optional) to groupname or to 14grp val defines the
group name of the server group to which the access
control list is redirected. If no server group is
specified, the access control list is used for redirection
to any server group that does not have an access
control list associated with it.
(Optional) to l4addr val defines the IP address of the
server to which traffic is to be redirected.
(Optional) l4dur val is the amount of time, in
seconds, for which traffic is to be redirected,
beginning with the first packet that gets redirected.
(Optional) l4freq val is the period of time, in seconds,
between activations of redirection.
OL-14660-03