Cisco 10000 Series Configuration Manual page 148

show aaa user
When you use the all keyword, a large amount of output may be produced, depending on the number of
Note
users who are logged into the device at any time.
Examples
The following example shows that information is requested for all users:
Router# show aaa user all
The following example shows that information is requested for user 5:
Router# show aaa user 5
The following is sample output from the show aaa user command. The session information displayed
is for a PPP over Ethernet over Ethernet (PPPoEoE) session.
Router# show aaa user 3
Load for five secs: 0%/0%; one minute: 0%; five minutes: 0%
Time source is hardware calendar, *20:32:49.199 PST Wed Dec 17
2003
Unique id 3 is currently in use.
Accounting:
update method(s) :
update interval = 0
Outstanding Stop Records : 0
Dynamic attribute list:
No data for type EXEC
No data for type CONN
NET: Username=peer1
No data for type CMD
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
A-16
log=0x20C201
Events recorded :
CALL START
NET UP
IPCP_PASS
INTERIM START
VPDN NET UP
NONE
63CCF138 0 00000001 connect-progress(30) 4 LAN Ses Up
63CCF14C 0 00000001 pre-session-time(239) 4 3(3)
63CCF160 0 00000001 nas-tx-speed(337) 4 102400000(61A8000)
63CCF174 0 00000001 nas-rx-speed(33) 4 102400000(61A8000)
63CCF188 0 00000001 elapsed_time(296) 4 2205(89D)
63CCF19C 0 00000001 bytes_in(97) 4 6072(17B8)
63CCF1B0 0 00000001 bytes_out(223) 4 6072(17B8)
63CCF1C4 0 00000001 pre-bytes-in(235) 4 86(56)
63CCF1D8 0 00000001 pre-bytes-out(236) 4 90(5A)
63CCF1EC 0 00000001 paks_in(98) 4 434(1B2)
63CCF244 0 00000001 paks_out(224) 4 434(1B2)
63CCF258 0 00000001 pre-paks-in(237) 4 7(7)
63CCF26C 0 00000001 pre-paks-out(238) 4 9(9)
Session Id=00000003 Unique Id=00000003
Start Sent=1 Stop Only=N
stop_has_been_sent=N
Method List=63B4A10C : Name = default
Attribute list:
63CCF138 0 00000001 session-id(293) 4 3(3)
63CCF14C 0 00000001 Framed-Protocol(62) 4 PPP
63CCF160 0 00000001 protocol(241) 4 ip
63CCF174 0 00000001 addr(5) 4 70.0.0.1
Chapter A ANCP Command Reference
OL-14660-03