Verifying Radius-Based Shaping And Policing - Cisco 10000 Series Configuration Manual

Verifying RADIUS-Based Shaping and Policing

The ISG copies the service policy named Parent currently applied to the session and creates a transient
copy named New_Parent to which it makes the appropriate changes. Based on the Cisco VSA included
in the Access-Accept message, the ISG changes the policing rate of the Premium traffic class from 5000
bps to 200,000 bps. The Premium class is configured in the New_Child policy, which is applied to the
New_Parent class-default class.
ISG Transient Policy
policy-map New_Child
!
policy-map New_Parent
Verifying RADIUS-Based Shaping and Policing
To verify the configuration of RADIUS-based shaping and policing on the ISG, use any of the following
commands in privileged EXEC mode:
Command
Router# show policy-map interface
Router# show policy-map interface interface
[input | output]
Router# show policy-map policy-map-name
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
6-20
class Premium
police 200000
class class-default
shape average 10000
service-policy New_Child
Chapter 6
[New cloned child policy]
[New policing rate]
[New cloned parent policy]
[New cloned child policy attached to the new
cloned parent policy]
Displays
The configuration of all classes configured for all policy maps
attached to all interfaces. Also displays the serviced default policy
map.
The configuration of all classes configured for all inbound or
outbound policy maps attached to the specified interface.
interface is the name of the interface or subinterface.
input indicates to display the statistics for the attached inbound
policy.
output indicates to display the statistics for the attached outbound
policy. If you do not specify input or output, the router shows
information about all classes that are configured for all inbound
and outbound policies attached to the interface you specify.
The configuration of all of the traffic classes contained in the
policy map you specify.
policy-map-name is the name of the policy map for the
configuration information you want to appear.
If you do not specify a policy-map-name, the command shows the
configuration of all policy maps configured on the router.
RADIUS-Based Shaping and Policing
OL-14660-03