Cisco 10000 Series Configuration Manual page 135

Chapter A ANCP Command Reference
The following examples show how to configure the aaa connect-info command in the configuration
modes indicated:
PVC Mode
interface atm1/0.1 point-to-point
PVC Range Mode
interface atm 1/0
PVC In-Range Mode
interface atm 1/0
VC Class Mode
vc-class atm conninfo
interface atm 1/0
Related Commands
Command
aaa description-attribute-77
class-vc
service-policy
show atm class-links vpi/vci
show atm pvc vpi/vci
OL-14660-03
pvc 2/200
aaa connect-info speed:ubr:2303:224:10:isp-specific-desc
range pvc 2/45 2/47
aaa connect-info speed:ubr:2303:224:10:isp-specific-desc
range pvc 2/25 2/27
pvc-in-range 2/46
aaa connect-info speed:ubr:2303:224:10:isp-specific-desc
aaa connect-info speed:ubr:2303:224:10:isp-specific-desc
pvc 1/10
class-vc conninfo
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Description
Specifies connection information, which the router copies to
Attribute 77.
Specifies a VC class, which the router copies to Attribute 77.
Specifies a service policy to be applied to an interface,
subinterface, or PVC. To customize Attribute 77 for Ethernet
connections, enter the connection information as the name of the
service policy attached to the Ethernet subinterface. The router
takes the policy name and copies it to Attribute 77.
Displays the inheritance level at which the aaa connect-info
command is configured.
Displays the connect-info string, when configured.
aaa connect-info
A-3