Canon imageFORMULA DR-X10C Service Manual page 154

CHAPTER 4 INSTALLATION & MAINTENANCE
No.
5
Connect the cable
(J126) of the control PCB. Then se-
2
cure the cable holder
(accessory, M3).
6 Reinstall the removed parts.
7 Set the provided patchcode sheet and
verify that it operates correctly.
Use the "Patchcode" in the service
mode.
Refer to the "User Manual" for the details.
4-16
Step
1 to the connector
3 with 1 screw
COPYRIGHT © CANON ELECTRONICS INC. 2008
Details/Remarks
4
CANON DR-X10C FIRST EDITION