Canon imageFORMULA DR-X10C Service Manual page 151

No.
4
Set the ink pad unit
scanner main body and secure it with 2
screws 2 (which were removed in the
previous step).
5 Tilt the post-imprinter main body
slightly and while avoiding the right cable
and left sensor, place the main body on
the right and left supports
hind the upper unit, and secure it with 1
screw 3 (which were removed in the
previous step).
COPYRIGHT © CANON ELECTRONICS INC. 2008
Step
1 on the back of the
, set it be-
2
CANON DR-X10C FIRST EDITION
CHAPTER 4 INSTALLATION & MAINTENANCE
Details/Remarks
1
4-13