Canon imageFORMULA DR-X10C Service Manual page 141

No.
Take out the main body and accessories
2
and move the main body to the installa-
tion location.
Check that the accessories are present.
1 Main body
Power cord
2
3 Ground cord (100V model only)
4 USB cable
5 Pickup roller
Feed roller
6
Easy Start Guide
7
8 Reference Guide
9 DR-X10C Setup Disc
10 Roller cleaning sheet
Cleaning cloth
11
12 Binder (200V model only)
13 Warranty card (depending on mod-
els)
Note:
1) The weight of the main body is approx.
39 kg. When taking the main body out
or moving it, 2 persons must hold it
from both sides. Use a cart, etc. when
moving it.
Place the main body at the installation
3
location.
Note:
1) Since it is heavy, place it on a flat,
sturdy surface.
2) Place the rubber feet (4 places) on the
bottom and the stoppers (2 places) of
the right and left covers for tip resis-
tance on the same flat surface.
COPYRIGHT © CANON ELECTRONICS INC. 2008
Step
CANON DR-X10C FIRST EDITION
CHAPTER 4 INSTALLATION & MAINTENANCE
Details/Remarks
Rubber foot
Stopper
4-3