CHAPTER 3 DISASSEMBLY & REASSEMBLY
11) Remove 2 screws
remove the holding plate (left)
move 2 screws
remove the reinforcing plate
remove the screw
remove the hinge
and coil spring
9
Remove two screws
remove the support plate 11 and shaft
guide
12
.
Figure 3-613
3-44
1
(TP head) and
2
. Re-
3
(TP head, black) and
4
. Then,
5
(TP head) and
6
, arm
7
, shaft
.
10
(TP head) and
COPYRIGHT © CANON ELECTRONICS INC. 2008
12) Verify that the upper unit is closed, re-
move 2 screws
remove the damper (right)
In the same way, remove the damper
(left).
8
Dampers
The right and left dampers are same in
shape, but different in function. If they are
mounted incorrectly, the damper function
does not work correctly. The method of
identifying the right and left dampers is
shown below. The color of the end surface
of the main body is different. The damper
(left) is white and the damper (right) is
black.
White→left
1
(M3, black) and
2
Figure 3-614
Left
Right
Black→right
Figure 3-615
CANON DR-X10C FIRST EDITION
.