Canon imageFORMULA DR-X10C Service Manual page 143

No.
5 Install the pickup roller and feed roller.
Note:
1) The "Easy Start Guide" for users de-
scribes the procedure that can be per-
formed by the user. The service
technician should also refer to it. The
procedure is shown below.
Step 1: Checking the Package Con-
tents.
Step 2: Installing the Rollers
Step 3: Installing the Software
Step 4: Connecting the Scanner to the
Computer
Step 5: Turning the Power ON
Step 6: Selecting the Scanner
COPYRIGHT © CANON ELECTRONICS INC. 2008
Step
CANON DR-X10C FIRST EDITION
CHAPTER 4 INSTALLATION & MAINTENANCE
Details/Remarks
1) Open the roller cover.
2) Set the pickup roller, turn the lock lever to the
back and lock it.
3) Align the notch on the feed roller with the
shaft on the main body and set the feed
roller.
4) Move the roller lock lever and secure the
feed roller.
5) Close the roller cover.
4-5