Environment Parameters - Excell PW Service Manual

EXCELL PRECISION CO., LTD

2-4-1 Environment parameters

4 If parameters are changed in
Press
TARE
Using
ON/ZERO
to enter
Press
TARE
Using or
ON/ZERO
to enter
Press
TARE
Using or
ON/ZERO
to enter
Press
TARE
Enter "00"
Press to exit the
TARE
environment parameters
PW Service Manual
or
UNITS
UNITS
UNITS
, then will be revised automatically
Return to zero
The display shows the current setting
Return to zero point
Using
ON/ZERO
Default = 0
0 ⇒ show all 5 ⇒ within 5 d
1 ⇒ within 1 d 6 ⇒ within 6 d
2 ⇒ within 2 d 7 ⇒ within 7 d
3 ⇒ within 3 d 8 ⇒ within 8 d
4 ⇒ within 4 d 9 ⇒ within 9 d
4 Weight value must over 1/3 full scale
Stabilization range
Display shows the current setting
Stabilization range
Use ON/ZERO or UNITS keys to input
the parameters. Default setting = 0
Range 0 ~ 9, the larger the number the
more stable the weight.
Filter setting
Display shows the current setting
Weighing Filter setting
Use ON/ZERO or UNITS keys to input the
parameters. Default setting = 5
Range 0 ~ 9, the larger the number, the
faster the filter response. Fast response
could lead to display weight instability.
ON/ZERO key ⇒ Step Up key
(Selects number 0,1,2,3,4,5,6,7,8,9)
UNITS key ⇒ Step Down key
(Selects number 0,1,2,3,4,5,6,7,8,9)
TARE key ⇒ Right key, flashing digit move to the right
NET/GROSS key ⇒ Left key, flashing digit move to the left
27
or to enter
UNITS
SME300000016