Auto Transmission At Zero - Excell PW Service Manual

EXCELL PRECISION CO., LTD

3-5-6 Auto Transmission at Zero

Select
set the Auto Transmission at Zero.
ACTIONS
Press key
TARE
Use or
ON/ZERO UNITS
keys to key in the desired
parameters
Press key
TARE
Key in the parameter "00"
Press the key to exit
TARE
RS232 serial interface
settings
4 When the value of "Auto transmission at zero" set as
zero" function is not available. Because when the scale is at zero and keeping stable, the
data are keeping transmitted, that would be the same as "Continuous Transmission".
PW Service Manual
in the RS232 serial interface setting mode
DISPLAY
NOTE
Auto transmission at zero
LCD shows the last setting
Default setting:
n
Auto transmission at zero
Use ON/ZERO or UNITS keys to key in the
desired parameters:
ON/ZERO key ⇒ Increment number by 1
UNITS key ⇒ Decrement number by 1
TARE key ⇒ Move cursor one place to the right
NET/GROSS key ⇒ Move cursor one place to the left
49
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
, the "Auto transmission at
SME300000016
to