Chapter 8 Maintenance; Reset All Parameters Back To Default; Reset General Function Parameters Back To Default; Self-Diagnosis Mode - Excell EX-2001 Racer Plus User Instructions

EXCELL PRECISION CO., LTD.

CHAPTER 8 MAINTENANCE

8-1 RESET ALL PARAMETERS BACK TO DEFAULT

(1) Switch the capacity calibration switch to "ON", press and hold
together when the indicator is in the self-testing sequence.
(2) The display shows
(3) Press and hold the
switch to "OFF".
8-2 RESET GENERAL FUNCTION PARAMETERS BACK TO
DEFAULT
(1) When the indicator reset back to zero, press and hold
The indicator is in the self-testing sequence.
(2) The display shows
(3) Press and hold the

8-3 SELF-DIAGNOSIS MODE

(1) When the indicator reset back to zero, press and hold
The indicator is in the self-testing sequence.
(2) When the display shows
Self-diagnosis mode.
(3) Press and
the selected item for diagnosis and press
EX-2001 Plus v1.3
. .
key until the display shows
. .
key until the indicator resets.
, it means the indicator is already in the
keys to select a diagnosis item. Press the
36
F n
. Switch the calibration
keys.
F n
keys.
to exit.
keys
key to enter
SME300000060