Hold Function Settings - Excell PW Service Manual

EXCELL PRECISION CO., LTD

3-3-6 Hold Function Settings

Select
hold function.
ACTIONS
Press key
TARE
Use or
ON/ZERO UNITS
key to key in the
parameters
Press key
TARE
Key in the parameter "00"
Press key to
TARE
complete the general
setting procedures
= Hold function disabled
= "Peak hold" mode
Keep displaying the maximum weight when the weight is continually changing
To exit this mode, press any key.
= "Stable hold 1" mode
When the weight is stable, the LCD shows the current weight value. To exit
this mode, press any key.
= "Stable hold 2" mode
When the weight is stable, the LCD shows the current weight value. When the
weight returns to zero (<10d), the hold mode is cancelled automatically.
PW Service Manual
in the general function setting mode
DISPLAY
NOTE
Hold function setting
LCD displays the last parameter setting
Hold function setting
Use or
ON/ZERO UNITS
parameters
Default setting = 0
0 ⇒ Hold function disabled
1 ⇒ "Peak hold" mode
2 ⇒ "Stable hold 1" mode
3 ⇒ "Stable hold 2" mode
ON/ZERO key ⇒ Increment number by 1
UNITS key ⇒ Decrement number by 1
TARE key ⇒ Move cursor one place to the right
NET/GROSS key ⇒ Move cursor one place to the left
40
to set the
keys to key in the
SME300000016