Hi/Lo/Ok Settings - Excell PW Service Manual

EXCELL PRECISION CO., LTD

3-3-3 HI/LO/OK Settings

Select
HI/LO/OK function.
ACTIONS
4 When the high limit and low limit are both set as "0", the Hi/Lo/OK function is disabled.
Press key
TARE
Key in the desired high
limit value
Press key
TARE
Key in the desired low limit
value
Press key
TARE
Key in the parameter
setting for alarm
Press key
TARE
ON/ZERO key ⇒ Increment number by 1
UNITS key ⇒ Decrement number by 1
TARE key ⇒ Move cursor one place to the right
NET/GROSS key ⇒ Move cursor one place to the left
PW Service Manual
in the general function setting mode
DISPLAY
.
.
.
.
lb
LCD displays the last status
lb
lb
LCD displays the last status
lb
LCD displays the last status
Alarm setting
(a) (b) (c)
The definition of a, b, c positions:
(a) ⇒ 1 = beep sound on
0 = beep sound off
(b) ⇒ 1 = beep sound on when stable
0 = beep sound on when unstable
(c) ⇒ 1 = beep sound on when the weight is
between high and low limits
0 = beep sound on when the weight is not
between high and low limits and
higher than 10d
37
to set the
NOTE
SME300000016