Panasonic FP0H User Manual page 99

No. Name
Selection of operation in case of
4
battery error
(Note 1): System register No.0 (sequence program area capacity) and System register No.1 (internal relay capacity)
can only be set during offline editing. To make the setting effective, you need to download it to the control unit.
(Note 2): When system register initialization is performed, System register No.7 is initialized according to System
register No.1. System register No.8 is initialized according to System register No.0.
The range of System register No. 7 varies as follows, depending on the value of System register No.1.
System register No.1
Setting of internal relay capacity
4096 points
8192 points
The range of System register No. 8 is as follows, depending on the value of System register No.0.
System register No.0
Setting of sequence program area
capacity
24Kstep
32Kstep
40Kstep
64Kstep
When the system register is initialized, the value of No.7 / No.8 is as follows.
System register No.1
Setting of internal relay capacity
4096 points
8192 points
System register No.0
Setting of sequence program area
capacity
24Kstep
32Kstep
40Kstep
64Kste
(Note 3): System register No.0: When the setting of sequence program area capacity is changed, the data register DT
capacity changes.
10.2 List of System Data Registers
Default Setting range and description
No:
No
Yes:
System register No.7
Hold area starting address of an
internal relay
0 to 256
0 to 512
System register No.8
Hold area starting address of a data
register
0 to 65533
0 to 32765
0 to 24573
0 to 12285
System register No.7
Hold area starting address of an
internal relay
248
504
System register No.8
Hold area starting address of a data
register
65218
32450
24258
11970
Self-diagnostic error is not reported in
case of battery error. ERR/ALM LED
does not flash.
Self-diagnostic error is reported in
case of battery error. ERR/ALM LED
flashes.
10-5