Panasonic FP0H User Manual page 100

Specifications
No. Name
Wait time for multiple frame
31
processing
Timeout time for SEND / RECV,
32
RMRD / RMWT instructions
34 Constant scan time
37 Task time priority setting (Note 1)
40 Range of link relays used
41 Range of link registers used
42 Link relay send starting word No.
43 Link relay send size
44 Link register send starting No.
45 Link register send size
46 PLC link switch flag
MEWNET-W0
47 PLC link max. unit number
specifiation
48 PLC link baud rate (Note 2)
50 Range of link relays used
51 Range of link registers used
52 Link relay send starting word No.
53 Link relay send size
54 Link register send starting No.
55 Link register send size
MEWNET-W0
57
PLC link max. unit No. specifiation
(Note 1): Valid only in RUN mode. Standard is applied in PROG mode.
By selecting "Operation", the time taken for communication processing is reduced to one port per scan, and
operation processing takes priority.
(Note 2): System register No. 48 PLC link baud rate is set in the same dialog box as the one used for setting COM0
port, COM1 port, and COM2 port.
10-6
Default Setting range and description
6500 ms 10 to 81900 ms (by 2.5 ms)
10000 ms 10 to 81900 ms (by 2.5 ms)
Normal 0: Normal scan (by 0.5 ms)
scan 0 to 600 ms: Scan at a specified interval
Standard Standard / operation
0 0 to 64 words
0 0 to 128 words
0 0 to 63
0 0 to 64 words
0 0 to 127
0 0 to 127 words
Standard Standard / reverse
16 1 to 16
115200 bps 115200 bps / 230400 bps
0 0 to 64 words
0 0 to 128 words
64 64 to 127
0 0 to 64 words
128 128 to 255
0 0 to 127 words
16 1 to 16