Field Programming Equipment; Pm1200 Field Programming; Field-Programming Items; Table 4-6. Pm1200 Radio Field-Programming Items - Motorola PM1200 Basic Service Manual

Test Equipment, Service Aids, and Tools: Field Programming Equipment
4.3

Field Programming Equipment

The PM1200 mobile radios can be aligned and programmed in the field. This requires specific
equipment and special instructions. Refer to the online help in Customer Programming Software.
4.3.1

PM1200 Field Programming

The PM1200 radios use a flash-memory device to store information about frequencies, squelch
codes, signaling codes, time-out timer durations, and other parameters.
The PM1200 radios can be programmed in the field any number of times without removing the flash
memory from the radio.
To program the radio, connect Telco CPS Programming cable AARKN4081_ to the Telco connector.
Refer to the CPS Installation Guide for installation and setup procedures for the software.

4.3.1.1 Field-Programming Items

Once the computer is connected to the radio, the prompts provided by the programming software
can be followed. The following items, available through the Radio Products Services Division (except
the computer), are required when programming PM1200 radios.
Type or Part Number
Programming Cable
Computer, IBM or IBM
PC-compatible
Customer Programming
Software and Tuner Software
6880309U09-A

Table 4-6. PM1200 Radio Field-Programming Items

Used to connect radio directly to the computer,
This software enables you to program the radio's features and
align its parameters.
Description
Table 4-3
–
4-3
.
October 26, 2007