Disassembly/Reassembly Procedures: Replacement Procedures
3. Carefully remove the top cover [24] by lifting both side edges. It may be necessary to gently
pry the cover off using a plastic tool
4. Using a CR-V PH2 screwdriver, remove 3 SEMS screws, HSM3x6 NI [17] and a taptite screw,
M3x8 NI [14] from the radio as shown in
Figure 6-53. Removing Screws from Main-Unit Board Kit and PA-Unit Board Kit
6880309U09-A
Figure
6-52.
Figure 6-52. Lifting the Top Cover
Figure
4
3
2
1
Plastic Tool
6-53.
6-29
October 26, 2007