Disassembly/Reassembly Procedures: Chassis Thermal Compound Replacement Procedure
7. Place the top cover on the chassis and seat it properly. Compress the cover and chassis
together to squeeze the foam into place and make torquing the screws easier.
8. Using a CR-V PH2 torque driver, fasten the 7 binding head screws, M3x6 SUS B to the top
cover following the sequence as shown in
5–6 in. lbs).
6.3
Chassis Thermal Compound Replacement Procedure
Follow the following procedures when replacing the chassis thermal compounds.
6880309U09-A
5
2
Figure 6-90. Sequence for Installing Top Cover Screws
1
1
Figure 6-91. Chassis Thermal Compound Locations
Figure 6-90
(Torqued to 5.8–6.9 kgf*cm/
4
3
6
7
1
1
6-47
October 26, 2007