Disassembly/Reassembly Procedures: Replacement Procedures
6-27
8. Insert and press the holder [15] to fix the electronic component (Q2018).
Figure 6-48. Inserting Holder to Fix the Electronic Component
9. Connect the mating connector [A] of wire assembly 160mm 20P26P [26] and the mating
connector [C] of wire assembly [27] to the main-unit board kit [13] as shown in
Figure
6-49.
Mating Connector [A]
Mating Connector [C]
Figure 6-49. Connect Mating Connector to Main-Unit Board Kit
6880309U09-A
October 26, 2007