Figure 6-57. Desoldering Antenna Connector And Earth Plate From Pa-Unit Board Kit; Figure 6-58. Desoldering Tx And Rx Wires - Motorola PM1200 Basic Service Manual

Disassembly/Reassembly Procedures: Replacement Procedures 6-31
8. Carefully desolder the antenna connector [32] and earth plate [33] from the PA-unit board kit
[20] and remove them from the chassis [11] as shown in Figure 6-56.
Earth Plate
Antenna Connector

Figure 6-57. Desoldering Antenna Connector and Earth Plate from PA-Unit Board Kit

9. Carefully desolder the brown 2-wire assembly (Tx and Rx wires) as shown in Figure 6-58.
INSULATED WIRE
TX WIRE
INSULATED WIRE
RX
GND
RX WIRE
TX
GROUND WIRE
GND
GROUND WIRE

Figure 6-58. Desoldering Tx and Rx Wires

6880309U09-A October 26, 2007