Dd9500/Dd9800 Front Panel; Front Led Indicators; Front Panel Components; Panel - Dell Data Domain DD9500 Hardware Overview And Installation Manual

Hardware Overview

DD9500/DD9800 front panel

Front LED indicators

Data Domain DD9500 and DD9800 Systems 6.1 Hardware Overview and Installation Guide
18
The four solid state drives (SSDs), the storage processor (SP), and the fans are
accessed from the front of the system. The SP must be pulled out to provide access
to the DIMMs. The fans are accessed without pulling or removing the SP and they are
hot-swappable. The photo shows the interfaces on the front of the system.
Figure 2 Front panel components
1. SSD slot 0
2. SSD slot 1
3. SSD slot 2
4. SSD slot 3
5. Front LEDs
6. USB ports
7. Power button
8. Fan tray thumbscrew (left)
9. SP module thumbscrew to secure the ejector handle
10. Fan tray thumbscrew (right)
On the front panel to the right of SSD #4 (in Slot 3) are 3 LEDs that show high level
system status. The System Power LED glows blue to show the system is powered on.
Note
The system can have power (be plugged in) but the blue LEDs are off if the system is
powered off.
The SP Service LED is normally off, but glows amber whenever the storage processor
(SP) requires service. The Enclosure Service LED is normally off, but glows amber
whenever the SP or other replaceable parts require service. The System Power and
Enclosure Service LEDs are visible through the front bezel.