Insert Screw In The Front; Attach Bracket To Front Of Rack - Dell Data Domain DD9500 Hardware Overview And Installation Manual

Install the System in the Rack
Data Domain DD9500 and DD9800 Systems 6.1 Hardware Overview and Installation Guide
42
Figure 23 Insert screw in the front
5. Attach the front of the brackets with two screws each in the two middle holes
(innermost holes) as shown in the picture.
Figure 24 Attach bracket to front of rack
6. Verify that the bracket is level.
7. Repeat the steps to attach the remaining bracket to the other side of the rack.
8. After installing both brackets, make sure that they are level with one another.