Connecting The Ha Interconnect; Cabling For Dd9500 And Dd9800 Systems With Erso - Dell Data Domain DD9500 Hardware Overview And Installation Manual

Connect Cables and Power on
Figure 47 Cabling for DD9500 and DD9800 systems with ERSO

Connecting the HA interconnect

The HA interconnect consists of a 10 GbE I/O module in slot 11 of each node in the HA
pair. This connection between the two nodes provides the standby node with the
information it needs to failover if the active node suffers a failure, and maintain the
connections to hosts and clients after the failover is complete.
Connecting the HA interconnect
81