Configuring Additional System Parameters - Dell Data Domain DD9500 Hardware Overview And Installation Manual

Configure System For Use
ethMe no
ethMf no
----- -------
Do you want to save these settings (Save|Cancel|Retry):

Configuring additional system parameters

Data Domain DD9500 and DD9800 Systems 6.1 Hardware Overview and Installation Guide
90
no n/a
no n/a
----- ----
Most installations would benefit from the configuration of a few additional system
parameters, provided in this section for convenience.
Note
You can also use the Data Domain (DD) System Manager GUI interface to configure
the system parameters. Open a web browser, and enter your Data Domain system's IP
address in the browser's address text box. Log in when the DD System Manager login
screen displays. Use the DD System Manager online help for more information.
Procedure
1. To set up the mail server, enter:
# config set mailserver mail.datadomain.com
The Mail (SMTP) server is: mail.datadomain.com
2. To set up the system location, enter:
# config set location "Dallas Regional Data Center Lab,
5000 Apple Drive Suite #130, Dallas, Tx"
The System Location is: Dallas Regional Data Center Lab,
5000 Apple Drive Suite #130, Dallas, Tx
3. To add one or more time servers, enter:
Note
HA configuration requires that the two nodes maintain a time difference of no
more than 10 seconds.
# ntp add timeserver 192.168.101.1
Remote Time Servers: 192.168.10.1
4. To enable the NTP daemon, enter:
# ntp enable
NTP enabled.
5. To change the system time zone, enter:
# config set timezone US/Central
The Timezone name is: US/Central
*** You made a change to the timezone setting.
this change
*** (in currently running processes), you need to reboot the
machine.
6. Reboot the primary node for the time zone change to take effect:
# system reboot
The 'system reboot' command reboots the system. File access is
interrupted during the reboot.
Are you sure? (yes|no|?) [no]: yes
ok, proceeding.
The system is going down for reboot.
n/a n/a
n/a n/a
-------------- ------------------------
To fully effect