Enclosure Front Panel; Enclosure Rear Panel - Dell VERLAND TANDBERG Titan T2000 Owner's Manual

2U enclosure front panel
In the following figures, integers on disks indicate drive slot numbering sequence.
Figure 7. 2U12 enclosure system—front panel components
Figure 8. 2U24 enclosure system—front panel components
NOTE:
● For information about enclosure front panel LEDs, see
● For information about disk LEDs for LFF and SFF disk modules, see
● For information about the optional 2U enclosure front bezel, see
2U enclosure rear panel
The controller modules and IOMs use alphabetic designators, and the Power Cooling Modules (PCMs) use numeric designators
to identify the slots in a 2U enclosure.
There are two redundant controller modules that use a series of LEDs to reflect host connectivity status. You can monitor the
LEDs from the rear panel area to determine system status.
Figure 9. 2U controller enclosure—rear panel components
1. PCM 0
3. PCM 1
12 Storage system hardware
2U enclosure Ops panel.
Using LEDs
Attach or remove the front bezel of a 2U
2. Controller module A
4. Controller module B
on page 70.
enclosure.