Saving And Deleting The Log - Siemens SIPROTEC 5 Manual

System Functions
3.1 Indications
[scgerhmi-230213-01.tif, 1, en_US]
Figure 3-18
NOTE
i
i
•
The device-diagnosis log cannot be deleted!
•
The logged indications are preconfigured and cannot be changed!

Saving and Deleting the Log

3.1.10
Deleting the logs of the device in the operating state is unnecessary. If storage capacity is no longer sufficient
for new indications, the oldest indications are automatically overwritten with new incoming events. In order
for the memory to contain information about the new faults in the future, for example, after an inspection of
the system, a deletion of the log makes sense. Resetting the logs is done separately for the various logs.
NOTE
i
i
Before you delete the content of a log on your SIPROTEC 5 device, save the log with DIGSI 5 on the hard
disk drive of your PC.
NOTE
i
i
Not all logs of your SIPROTEC 5 device can be deleted. These limitations apply especially to logs with rele-
vance for security and after-sales (security log, device-diagnosis log, setting-history log).
60
Reading the Device-Diagnosis Log on the On-Site Operation Panel of the Device
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017