Application And Setting Notes - General Settings - Siemens SIPROTEC 5 Manual

Fault recorder, v7.50 and higher

Hide thumbs Also See for SIPROTEC 5:

Table of Contents

Power-System Data

5.3 Application and Setting Notes – General Settings

Application and Setting Notes – General Settings

Parameter: Phase sequence

Recommended setting value (_:2311:101) Phase sequence= ABC

The parameter Phase sequence is used to set the phase sequence (ABC) or (ACB). The setting value applies

to the entire SIPROTEC 5 device.

Use the General function to set the settings in the power-system data.

SIPROTEC 5, Fault Recorder, Manual

C53000-G5040-C018-5, Edition 11.2017

Siemens 7ke85