Temperature Simulation Without Sensors - Siemens SIPROTEC 5 Manual

Fault recorder, v7.50 and higher

Hide thumbs Also See for SIPROTEC 5:

Table of Contents

Finally, load the configuration in the device.

Temperature Simulation without Sensors

Connect a resistor on the sensor terminals of the RTD unit. Using this resistor, simulate a constant tempera-

ture. The resistance value should be around 50 Ω to 200 Ω.

If you want to simulate a changeable temperature, connect an adjustable resistor of maximum 470 Ω instead

of a fixed resistor.

SIPROTEC 5, Fault Recorder, Manual

C53000-G5040-C018-5, Edition 11.2017

Function-Group Types

6.5 Function-Group Type Analog Units

Siemens 7ke85