3-3 TOOL CARRIAGE ASSEMBLY_REPLACEMENT
Remove the RAIL COVER and open the FRONT COVER.
1
Disconnect PINCH ROLLER SENSOR WIRE and
2
SOLENOID WIRE.
Remove the SCREW A and SCREW B in order and remove
3
the TOOL CARRIAGE.
Tighten up SCREW B and SCREW A in order to fix the
4
TOOL CARRIAGE. Then, carry out the following
adjustments.
1. TOOL HEIGHT ADJUSTMENT
2. TOOL PRESSURE ADJUSTMENT
3. PRINT/CUT OFFSET ADJUSTMENT
PINCH ROLLER
SENSOR WIRE
2 SCREW B
1 SCREW B
3 Replacement of Main Parts
3
SOLENOID WIRE
1 SCREW A
2 SCREW A
25