About The Labels Affixed To The Unit - Roland Color Camm Pro PC-60 Service Notes

Turn off the main power SW before
servicing.
Main power SW still supplied even sub
power SW is turned off.

About the Labels Affixed to the Unit

These labels are affixed to the body of this product.
The following figure describes the location.
In addition to the
: Tips and advice before the adjustment.
: Indicates tightening torque.
8
kgf•cm
Torque
Electric charge.
Do not touch when power is on.
and symbols, the symbols shown below are also used.
About the Labels Affixed to the Unit@{\tx´¢˜
The wiring terminal intended for
connecetiion of the protective
earthing conductor associated
with the supply wiring.
Do not disconnect the cable of
this terminal except the time of
replacement.
: Indicates amount for Pen Pressure and Tension.
: Indicates clearance.