Figure 4-21 Dual Horizontal G5 Recessed Installation - Garmin G5 Installation Manual

4.1.2.6.3 Recess Mounting Dual G5 Horizontally
In an installation where the G5 Attitude indicator is in the Turn Coordinator position and a G5
DG/HSI is installed as well (ref
horizontally in a similar manner to the dual vertical recessed installation. A horizontal recessed
adapter plate will need to be field fabricated in order to fit the existing installation. This plate
must be fabricated of 0.090 thick 2024-T3 aluminum and must have some type of corrosion
protection (primer, alodine, etc.). A minimum of six No. 6, MS35206-2XX screws must be
used to secure the modified mounting adapter plate in place. Maintain 1.5D edge distance
minimum.

Figure 4-21 Dual Horizontal G5 Recessed Installation

Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
), the dual G5s may be installed recessed
Figure 4-21
This area intentionally blank
Page 47
190-01112-10
Rev. 9