Garmin G5 Installation Manual page 120

5.11.5 GNS 480 Configuration
Config Page
GND Maint Serial Setup
GND Maint ARINC 429 Setup
GND Maint Resolver Interface Setup
GND Maint Miscellaneous Setup
Note 1: Set configuration values and units to match the values indicated in the appropriate
AFM and document settings in the space provided.
Note 2: If the aircraft has no AFM set the values as determined by the existing placards,
instrument bugs or instrument markings.
Note 3: Existing placards related to airspeed limitations must be retained.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Config Option
CH (x)
(x represents any available Serial
Channel )
CH In (2)
(or any available 429 Port )
CH Out (1)
(or any available 429 Port )
CH Out (2)
(or any available 429 Port )
Resolver
CDI Select
This area intentionally blank
Page 120
Configuration Setting
Output = MapMX
SEL = EFIS
SPEED = Low
SDI = SYS1
SEL = GAMA 429
SPEED = Low
SDI = SYS1
SEL = VOR / ILS
SPEED = Low
SDI = SYS1
Not Installed
Use
190-01112-10
Rev. 9