5.2.3
Starting and stopping a spindle manually
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
Press the "Select tool" softkey.
The tool selection window opens.
Place the cursor on the desired tool and press the "OK" softkey.
The tool is transferred to the "T, S, M... window" and displayed in the field
of tool parameter "T".
4.
Select tool edge D or enter the number directly in field "D".
5.
Select the sister tool ST or enter the number directly into the "ST" field
6.
Press the <CYCLE START> key.
The tool is loaded into the spindle.
1.
Select the "JOG" operating mode.
2.
Press the "T, S, M" softkey.
3.
Select the desired spindle (e.g. S1) and enter the desired spindle speed
(rpm) or the constant cutting velocity (m/min) in the adjacent input field.
The spindle remains stationary.
4.
If the machine has a gearbox for the spindle, set the gear stage (e.g. auto).
5.
Select a spindle direction of rotation (clockwise or counterclockwise) in
the "Spindle M function" field.
6.
Press the <CYCLE START> key.
The spindle rotates.
7.
Select the "Stop" setting in the "Spindle M function" field.
Press the <CYCLE START> key.
The spindle stops.
Working in manual mode
5.2 Selecting a tool and spindle
91