Tool List For Multitool - Siemens SINUMERIK 840D sl Operating Manual

11.14.1

Tool list for multitool

If you work with a multitool, the tool list is supplemented by the column for the multitool location
number. As soon as the cursor is at a multitool in the tool list, certain column headings change.
Column header
Location
MT loc.
TYPE
Multitool name
Figure 11-19 Tool list with multitool in the spindle
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
Meaning
Magazine/location number
Multitool location number
Symbol for multitool
Name of the multitool
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool list" window is opened.
Tool management
11.14 Working with multitool
251