Searching For Program Blocks - Siemens SINUMERIK 840D sl Operating Manual

Procedure
6.18.4

Searching for program blocks

Using the "Search" function, you can go specifically to program blocks where you can edit
programs. You can find and replace text in one step.
Precondition
● The required program is opened in the mold making view.
● The "NC blocks" softkey is active.
Procedure
6.18.5 Changing the view
6.18.5.1 Enlarging or reducing the graphical representation
Precondition
● The mold making view has been started.
● The "Graphic" softkey is active.
Universal
Operating Manual, 05/2017, A5E40868517
1. Press the ">>" and "Select point" softkeys.
Cross-hairs for selecting a point are shown in the diagram.
2. Using the cursor keys, move the cross-hairs to the desired position in the
graphic.
3. Press the "Select NC block" softkey.
The cursor jumps to the associated program block in the editor.
1. Press the "Search" softkey.
A new vertical softkey bar appears.
Machining the workpiece
6.18 Mold making view
165