Cutting Edge Data - Siemens SINUMERIK 840D sl Operating Manual

Procedure
...
11.9.2

Cutting edge data

The "Tool Details" window provides the following data on the selected tool when the "Cutting
edge data" softkey is active.
Parameter
Magazine location
Tool name
ST
D quantity
D
Tool type
Geometry
Wear
Geometry
Wear
Universal
Operating Manual, 05/2017, A5E40868517
1. The tool list, the wear list, the OEM tool list or the magazine is opened.
2. Position the cursor to the desired tool.
3. If you are in the tool list or in the magazine, press the ">>" and "Details"
softkey.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window is displayed.
All of the available tool data is displayed.
5. Press the softkey "Cutting edge data" if you wish to display the cutting
edge data.
6. Press the softkey "Monitoring data" if you wish to display the monitoring
data.
Meaning
The magazine number is specified first, followed by the location number in the magazine.
If there is only one magazine, only the location number is displayed.
The tool is identified by the name and the sister tool number. You can enter the name
as text or number.
Sister tool number (for sister tool strategy)
Number of created cutting edges
Cutting edge number
Tool symbol with type number
Length
Tool length
Tool wear
Ø (diameter)
Tool diameter
Tool wear, diameter
Tool management
11.9 Tool details
243