Multi-Channel View For Large Operator Panels - Siemens SINUMERIK 840D sl Operating Manual

Displaying/hiding a multi-channel view
...
9.3

Multi-channel view for large operator panels

On the OP015 and OP019 operator panels as well as on the PC, you have the option of
displaying up to four channels next to each one. This simplifies the creation and run-in for multi-
channel programs.
Constraints
● OP015 with a resolution of 1024x768 pixels: up to three channels visible
● OP019 with a resolution of 1280x1024 pixels: up to four channels visible
● The operation of a OP019 requires a PCU50.5
Universal
Operating Manual, 05/2017, A5E40868517
1. Select the "Machine" operating area
2. Select the "JOG", "MDA" or "AUTO" mode.
3. Press the menu forward key and the "Settings" softkey.
4. Press the "Multi-channel view" softkey.
5. In the window "Settings for Multi-Channel View" in the selection
box "View", select the required entry (e.g. "2 channels") and define
the channels as well as the sequence in which they are to be dis‐
played.
In the basic screen for the "AUTO", "MDA" and JOG" operating
modes, the upper window of the left-hand and right-hand channel
columns are occupied by the actual value window.
6. Press the "T,F,S" softkey if you wish to view the "T,F,S" window.
The "T,F,S" window is displayed in the lower window of the left-
hand and right-hand channel column.
Note:
The "T,F,S" softkey is present only for smaller operator panels, i.e.
up to OP012.
9.3 Multi-channel view for large operator panels
Multi-channel view
203