Managing Several Cutting Edges - Siemens SINUMERIK 840D sl Operating Manual

Tool management
11.5 Tool list
You can use the configuration file to specify the data to be displayed for specific tool types in
the "Additional Data" window.
Procedure
11.5.3

Managing several cutting edges

In the case of tools with more than one cutting edge, a separate set of offset data is assigned
to each cutting edge. The number of possible cutting edges depends on the controller
configuration.
Tool cutting edges that are not required can be deleted.
Procedure
226
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The tool list is opened.
2. In the list, select an appropriate tool, e.g. an angle head cutter.
3. Press the "Additional data" softkey.
The "Additional Data - ..." window opens.
The "Additional data" softkey is only active if a tool for which the "Addi‐
tional Data" window is configured is selected.
1. The tool list is opened.
2. Position the cursor on the tool for which you would like to store more
cutting edges.
3. Press the "Edges" softkey in the "Tool list".
4. Press the "New cutting edge" softkey.
A new data set is stored in the list.
The cutting edge number is incremented by one and the offset data is
assigned the values of the cutting edge on which the cursor is positioned.
5. Enter the offset data for the 2nd cutting edge.
6. Repeat this process if you wish to create more tool edge offset data.
7. Position the cursor on the cutting edge that you want to delete and press
the "Delete cutting edge" softkey.
The data set is deleted from the list. The first tool cutting edge cannot be
deleted.
Operating Manual, 05/2017, A5E40868517
Universal