Oki C810 Maintenance Manual page 43

Oki Data CONFIDENTIAL
4. Print the printer configuration and check the printout for
successful installation of every added tray.
Print the printer configuration by following the steps described in section 3.6.
Check to make sure that every installed tray is shown in [Print Count] of [Printer
Information].
Note! If every added tray is not shown there, remove every installed tray unit and
reinstall them to the printer.
44072903TH Rev.1
5. Set the number of trays in the printer driver.
Setting should be made in the printer driver to have the printer recognize every added
tray.
If the printer driver hasn't been set up, set up the printer driver by referring to the relevant
user's manual (Setup) and then perform the following setup.
Note! Administrator privileges on the computer are required.
Settings for Windows PS printer driver
(Screen of Windows XP)
3. INSTALLATION
For Windows Vista/Server 2008, select
[Start] - [Control Panel] - [Printers].
For Windows XP , select [Start] - [Control
Panel] - [Printers and Other Hardware] -
[Printers and Faxes].
For Windows 2000, select [Start] -
[Settings] - [Printers].
For Windows Server 2003, select [Start]
- [Printers and Faxes].
Right-click the [OKI C810] or [OKI
C810(XPS] icon and select [Properties].
Select [Obtain Printer Information] in
[Installable Options] on the [Device
Settings] tab and click [Setup] or
[Obtain Printer Information]. For USB
connection, manually set an appropriate
value in [Number of Trays].
Click [OK].
43 /