Oki C810 Maintenance Manual page 154

Oki Data CONFIDENTIAL
LCD
Ready Attention
means no display in
LED LED
upper line.
Varies On
FUSER LIFE
Varies On
BELT LIFE
Varies On
%COLOR% TONER
EMPTY
44072903TH Rev.1
Description Handling
Notifies the life of the fuser unit Replace new
(warning). Displayed in
fuser.
a combination of other message
in the first line. Warning only (No
Life error).
This appears when the cover
was opened and closed just after
the fuser life error occurred.
Also this occurred instead of the
fuser life error, if the "FUSER
LIFE PRINT CONTINUE" setting
was 'ON'.
Notifies the life of the belt unit Replace new
(warning). Displayed in a
belt unit.
combination of other message
in the first line. Warning only (No
Life error).
This appears when the cover
was opened and closed just after
the belt life error occurred.
Also this occurred instead of the
belt life error, if the "BELT LIFE
PRINT CONTINUE" setting was
'ON'.
Notifies the toner is empty. This Replace new
is a warning only.
toner cartridge.
This appears when the cover
was opened and closed just after
the toner empty error occurred.
Also this occurred instead of the
toner empty error, if the "TONER
EMPTY PRINT CONTINUE"
setting was 'ON'.
Y
M
C
K
LCD
Ready Attention
means no display in
LED LED
upper line.
Varies On
%COLOR% TONER
NOT INSTALLED
Varies On
%COLOR% DRUM
LIFE
Varies On
BELT REFLEX
ERROR
Varies Varies
DENSITY SHUTTER
ERROR2
7. TROUBLESHOOTING PROCEFRURES
Description Handling
Notifies the toner cartridge is not Install the toner
installed. This is a warning only. cartridge.
%COLOR% Be careful
Y that the toner
cartridge
M
supplied with
C
the product
K
cannot be used
if the toner
cartridge of
other supply is
used.
Notifies the life of the drum. This Replace the
is a warning only. image drum
This appears when the cover in a displayed
was opened and closed just after color.
the drum life error occurred.
Also this occurred instead of
the drum life error, if the "DRUM
LIFE PRINT CONTINUE" setting
was 'ON'.
%COLOR%
Y
M
C
K
Belt Reflex Check Error.
PU firmware does not notify
this warning to CU firmware
at the time of Shipping Mode.
Therefore, this status does not
occur in a user environment.
Density Adjustment Shutter Error
2.
Error that does not occur at user
level.
Displayed only in FactoryMode.
PU firmware does not notify
this warning to CU firmware
at the time of Shipping Mode.
Therefore, this status does not
occur in a user environment.
−
−
154 /