Oki C810 Maintenance Manual page 44

Oki Data CONFIDENTIAL
Installation of a roller cabinet
When placing the printer on the floor, it is recommended to use a roller cabinet. The printer
main unit, or printer with additional trays can be set on the cabinet.
This cabinet has rollers that allow users to move the printer easily.
You can store paper or consumable in this cabinet.
Cabinet
Accessories
Screw
Anti-tip bracket
(17 pieces)
cover (6 pieces)
Support Plate
(1 piece)
44072903TH Rev.1
Anti-tip bracket Anti-tip bracket
for the rear side for the front side
(2 pieces) (2 pieces)
1. Turn off the printer to remove the power cord and the printer
cable.
Note! Installing with the printer ON may damage the printer.
Memo Refer to "Turning off the power" for the turn-off procedure.
2. Put the additional trays on the cabinet.
Note! Do not lift the printer and additional trays together.
Holes on the
Additional tray
bottom
Pin
Holes on the
Additional tray
bottom
Pin
Cabinet
3. INSTALLATION
Align the holes on the bottom of the
additional tray to the pins of the cabinet.
Place the additional trays gently on the
cabinet.
44 /