Oki C810 Maintenance Manual page 162

Oki Data CONFIDENTIAL
Online Check
LCD
lamp Lamp
CHECK TONER Off Blink Shows that the toner cartridge lever has
CARTRIDGE
%ERRCODE%:
%COLOR%
IMPROPER LOCK
LEVER
POSITION
CHECK IMAGE DRUM Off Blink The image drum is not correctly installed.
%ERRCODE%:
%COLOR%
DRUM ERROR
CHECK FUSER Off Blink The fuser unit is not correctly installed.
%ERRCODE%:
FUSER ERROR
CHECK BELT Off Blink
%ERRCODE%:
BELT ERROR
POWER OFF AND WAIT Off Blink
FOR A WHILE
%ERRCODE%:
MOTOR
OVERHEAT
CLOSE COVER Off Blink The cover is open.
%ERRCODE%:
COVER OPEN
CLOSE COVER Off Blink The cover is open.
%ERRCODE%:
REAR COVER OPEN
WAIT A MOMENT Off Blink The printer is receiving the NIC download
DATA RECEIVE
WAIT A MOMENT Off Off
DATA RECEIVED OK
44072903TH Rev.1
Description
not been locked.
Error 544 : Y
Error 545 : M
Error 546 : C
Error 547 : K
Error 340 : Y
Error 341 : M
Error 342 : C
Error 343 : K
(This error can occur when the printer
temperature is below 0 degree C.
Turn on the power again after the printer
temperature has increased.)
The belt unit is not correctly installed.
Motor Driver ID overheat is detected.
Error 310 : Top Cover
Error 311 : Front Cover
Error 316 : Duplex Unit
data.
The printer finished receiving the NIC
download data.
Online
Code
LCD
Nnn
Error CHECK DATA
REC DATA ERROR
544
<%DLCODE%>
545
546
547
Error
340
WAIT A MOMENT
341
DATA WRITING
342
343 POWER OFF/ON
DATA WRITTEN OK
Error
CHECK DATA
320
DATA WRITE ERROR
<%DLCODE%>
Error
330
Error
321
REBOOTING
%CODE%
Error
310
311
Error
316
Error
SHUTTING DOWN
Error
7. TROUBLESHOOTING PROCEFRURES
Check
Description
lamp Lamp
Off On An error has happened while the printer is
receive-processing the download data.
%DLCODE%
1: Size error
2: Check-sum error
3: Invalid printer model number
4: Invalid module I/F version
5: Invalid FAT version
Off Blink The printer is writing the NIC download
data.
Off Off The printer finished writing the NIC
download data.
Off On An error has happened while the printer is
writing the download data.
%DLCODE%
1: Memory allocation error
2: Download file error
3: Device allocation error
4: No device space
5: File writing failure
6: CU-F/W mismatch
Off On Rebooting of the controller unit.
%CODE% is a decimal value (one digit)
and represents the reason to reboot.
= 0 ... Reboot due to a reason other than the
followings.
= 1 ... Reboot due to PJLCommand.
= 2 ... Reboot in accordance with a menu
change.
= 3 ... Reboot due to quit operator of
PostScript Language.
= 4 ... reboot by Network Utility
(including Web).
Off Off It is shown that a printer is shutting down.
Shutdown processing is started with which
press BACK button 4 seconds or more after
the completion of initialization processing
of a printer.
Code
Nnn
Error
Error
Error
Error
Error
Error
162 /