Selecting The Display Language; Adjusting The Display Contrast; Setting Up The Date And Time Display - Fluke 701 User Manual

701/702
Users Manual

Selecting the Display Language

The calibrator displays information in five languages.
English language is the default. To change the
display language, proceed as follows:
1. Press s.
2. Press the third softkey from the left twice.
3. Press dthree times.
4. Press e.
5. Press uor d to highlight your choice of
language.
6. Press e to confirm your choice. The
language you choose is the power-up default.
7. Press s to exit s mode.

Adjusting the Display Contrast

Press u or R to increase contrast. Press L or dto
decrease contrast. When the u and d keys are
being used to select an item from a list, for example
in s mode, use the L and R keys.
24

Setting Up the Date and Time Display

The date and time are optionally displayed at the top
of the display during normal operation. In s mode
you can turn on or off this date and time display. You
can also control the format used to display the date
and time. You should set the calendar and clock
whether or not you use the date and time display,
since a timestamp is applied to all saved results.
Proceed as follows to set up the time and date
displays:
1. Press s.
2. Press the Next Page softkey. The display
appears as follows: