Lens Control - NEC NC1700L Installation Manual

LCD Menu
4-3. Configuration
4-3-1. Light Setup
Adjust
Adjusts the light source brightness (output). This setting is the fraction based on taking the maximum value of light source
brightness as 100%.

4-3-2. Lens Control

Adjust the position, size, and focus of the projected screen.
Press the ENTER button to switch the display between "Lens Position" and "Focus Zoom" adjustments. Press the EXIT button
to return to a menu one level above.
Lens Position
Adjusts the position of the projected screen.
The projected screen moves in the selected direction as you press the UP/DOWN/LEFT/RIGHT button.
Focus Zoom
Adjusts the size (Zoom) and focus (Focus) of the projected screen.
Press the UP/DOWN button to adjust the focus.
Press the LEFT/RIGHT button to adjust the size of the projected screen.
92
← Adjusts the output power value (%).