Projector Adjustment And Connecting; Flow Of Adjustment And Connecting - NEC NC1700L Installation Manual

3. Projector Adjustment and Connecting

3-1. Flow of Adjustment and Connecting

Adjustment and Connecting of the projector accord to the procedure below.
• Step1
Turning Your Projector On (See page 82)
• Step2
Setting The Date and Time in the Projector (See page 82)
• Step3
Setting the Projector Projection Method (See page 83)
• Step4
Adjusting the Lens (See page 84)
Display the test pattern to adjust the screen size, screen angle and focus.
• Step5
Connecting with the Image Input Port (See page 87)
• Step6
Connecting the Various Control Terminal (See page 88)
This chapter explains the adjustment and connection of the projector with Steps 1 to 6.
Steps 1 to 6 complete the adjustment and connection of the projector. Next, carry out various settings such as color adjustment
using DCC. Refer to the "Digital Cinema Communicator for S2 Installation Manual" for the procedure.
78