Configuration; Light Setup; Lens Control - NEC NP-02HD Installation Manual

4-3. Configuration

4-3-1. Light Setup

Adjust
Adjusts the light source brightness (output). This setting is the fraction based on taking the maximum value of light source brightness
as 100%.

4-3-2. Lens Control

Adjust the position, size, and focus of the projected screen.
Press the ENTER button to switch the display between "Lens Position" and "Focus Zoom" adjustments. Press the EXIT button to
return to a menu one level above.
Lens Position
Adjusts the position of the projected screen.
The projected screen moves in the selected direction as you press the UP/DOWN/LEFT/RIGHT buttons.
Focus Zoom
Adjusts the size (Zoom) and focus (Focus) of the projected screen.
Press the UP/DOWN buttons to adjust the focus.
Press the LEFT/RIGHT buttons to adjust the size of the projected screen.
← Adjusts the output power value (%).
LCD Menu
123