NEC NC1700L Installation Manual page 97

Off Timer
Automatically turns off the projector power once the configured time has elapsed. The time until the power is turned off can be
set in steps of 1 hour (up to a maximum of 24 hours). The timer starts from when the setting is applied by pressing the ENTER
button. While the timer is running, the remaining time is displayed in the format "Left **.* H". Set to "No Preset" to stop the timer.
Message
Sets the time until the replacement cycle (units: hours) of a part such as the light source. Once the usage time of the part
exceeds the configured time, a message is displayed on the LCD screen. "0 (-----) [H]" is set by default. With this setting, no
message is displayed.
← Displays the remaining time until the power is turned off.
← Sets the time until the power is turned off. (No Preset: Timer off)
← The current setting value is displayed with an asterisk (*).
← Sets the time until the replacement cycle (units: hours).
LCD Menu
97